LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 1.8L (LUW, LWE) - DTC P0010 To DTC P0442) >> Diagnostic Information and Procedures >> DTC P0097, P0098 or P0099: Intake Air Temperature (IAT) Sensor 2 Circuit >> Conditions for Setting the DTCs

Conditions for Setting the DTCs

WARNING: This page is about a different variant/trim than selected.

P0097 

NOTE: The scan tool display range is between -40 and +150°C (-40 and +302°F).

The ECM detects that the IAT sensor 2 signal is less than 13 Hz, colder than -60°C (-76°F), for greater than 5 s.

P0098 

The ECM detects that the IAT sensor 2 signal is greater than 390 Hz, warmer than 150°C (302°F), for greater than 5 s.

P0099 

The ECM monitors the IAT sensor 2 signal every 0.1 s, to determine if the signal has changed more than 100°C (212°F). The DTC fails when the condition exists for longer than 4 s.

scientia non olet · About LEMON Manuals