Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0030, P0031, P0032, P0036, P0037 and P0038
The ECM detects that the commanded state of the driver and the actual state of the control circuit do not match for greater than 5 s.
P0053 and P0054
The ECM detects the HO2S heater resistance is not within a specified range at engine start-up.
P0135 and P0141
The ECM detects the HO2S heater current is less than 0.30 A or greater than 2.5 A for greater than 8 s.