LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - AF40-6) >> Repair Instructions - On Vehicle >> Transmission Mount Bracket Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove front compartment insulator. Refer to Front Compartment Insulator Replacement .
  3. Remove the three-way catalytic converter. Refer to Three-Way Catalytic Converter Replacement .
  4. Using a suitable jack stand, support the rear of the transmission.
  5. Remove the transmission bracket mount to mount through bolt through bolt (1).
    Fig 1: Removing Transmission Bracket Mount To Mount Through Bolt Through Bolt
    GM2190832Courtesy of GENERAL MOTORS COMPANY
  6. Remove the 3 transmission mount bracket - rear bolts (1).
    Fig 2: Removing Transmission Mount Bracket - Rear Bolts
    GM2190833Courtesy of GENERAL MOTORS COMPANY
  7. Remove the transmission mount bracket - rear (2).