LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - AF40-6) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Adjustment >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Verify the transmission range selector lever is in the park position "P".
  2. Verify the transmission shift lever is in the park position.
  3. Engage the range selector lever cable adjust lock (2).
    Fig 1: Range Selector Lever Cable Adjust Lock
    GM3221606Courtesy of GENERAL MOTORS COMPANY
  4. Check the transmission range selector lever in all gear selections for proper operation.
  5. Install the engine control module. Refer to Engine Control Module Replacement .
scientia non olet · About LEMON Manuals