Conditions for Running the DTC

P2761

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in drive (D) range.
• Transmission Control Module (TCM) communication is normal.
• DTCs P2763 and P2764 are not set.

P2763

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P2764 is not set.

P2764

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P2763 is not set.