Conditions for Running the DTC

P2725

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in Drive (D) range.
• TCM communication is normal.
• DTCs P2729 and P2730 are not set.

P2727

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTCs P2729 and P2730 are not set.

P2729

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P2730 is not set.

P2730

• The ignition voltage is 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P2729 is not set.