Conditions for Running the DTC

P2716

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTCs P2720 and P2721 are not set.

P2719

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• The Automatic Transmission Fluid Temperature is more than 20°C (68°F).
• SLC3 current is more than 0.85 A.
• SLC3 current is not changed.

P2720

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P2721 is not set.

P2721

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P2720 is not set.