Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0976
The TCM detects an OFF signal (0 V) of the Shift Solenoid Valve 2 circuit when the Shift Solenoid Valve 2 is commanded ON (12 V) for 100 ms continuously after 5 times.
P0977
The TCM detects an ON signal (12 V) of the Shift Solenoid Valve 2 circuit when the Shift Solenoid Valve 2 is commanded OFF (0 V) for 100 ms continuously after 5 times.