LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - AF40-6) >> Diagnostic Information and Procedures >> DTC P0798, P0970 or P0971: Pressure Control Solenoid Valve 2 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Engine running, ensure the transmission fluid temperature is between 50-80°C (122-176°F).
  2. Engine running in Park position, parking brake applied, place the gear select lever in each gear position for 2-3 s. Return the gear select lever to the Park position.
  3. Verify the scan tool Pressure Control Solenoid Valve 2 Current parameter is between 0.1-1.1 A.
    • If the parameter between 0.1-1.1 A 
  4. Operate the vehicle within the Conditions for Running the DTC. It may be helpful to operate the vehicle within the conditions identified from the Freeze Frame/Failure Records data.
    • If the DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals