Conditions for Running the DTC

P0778

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTCs P0966 and P0967 not set.

P0965

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• The automatic transmission fluid temperature is more than 20°C (68°F).
• SLC1 current is more than 0.85 A.
• SLC1 target current is not changed.

P0966

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P0967 is not set.

P0967

• The ignition voltage is between 10.2-15.5 V.
• The engine speed is greater than 400 RPM for 2 s.
• The transmission is not in emergency mode.
• Driving in D range.
• TCM communication is normal.
• DTC P0966 is not set.