Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0748
- The ignition voltage is 10.2-15.5 V.
- The engine speed is greater than 400 RPM for 2 s.
- The transmission is not in emergency mode.
- Driving in D range.
- TCM communication is normal.
- DTCs P0962 and P0963 not set.
P0962
- The ignition voltage is 10.2-15.5 V.
- The engine speed is greater than 400 RPM for 2 s.
- The transmission is not in emergency mode.
- Driving in D range.
- TCM communication is normal.
- DTC P0963 is not set.
P0963
- The ignition voltage is 10.2-15.5 V.
- The engine speed is greater than 400 RPM for 2 s.
- The transmission is not in emergency mode.
- Driving in D range.
- TCM communication is normal.
- DTC P0962 is not set.