Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P0741

The ignition voltage is 10.2-15.5 V.
The engine speed is greater less 4, 000 RPM.
Engine torque is more than 0 N.m (0 lb ft).
The transmission is not in emergency mode.
Driving in D range.
Transmission control module (TCM) communication is normal.
DTCs P0716, P0717, P0721, P0722, P2759, P2762, P2763 and P2764 not set.

P0742

The ignition voltage is 10.2-15.5 V.
The engine speed is greater than 400 RPM.
Output speed is 0 RPM.
The transmission is not in emergency mode.
Driving in D range.
Transmission control module (TCM) communication is normal.
DTCs P0716, P0717, P0721, P0722, P2759, P2762, P2763 and P2764 not set.