Dynamic Test
WARNING: This page is about a different variant/trim than selected.
- Perform the line pressure check. Refer to Line Pressure Check .
- If the line pressure check not OK
Repair or replace the damaged component as necessary.
- If the line pressure check OK
- If the line pressure check not OK
- Perform the Torque Converter Diagnosis
- If the Torque Converter Diagnosis not OK
Repair or replace the damaged component as necessary.
- If the Torque Converter Diagnosis OK
- If the Torque Converter Diagnosis not OK
- Perform the Road Test to verify that not DTCs set.
- If DTC P0741 or P0742 is set
Refer to Component Testing
- If the DTC is not set
- If DTC P0741 or P0742 is set
- All OK.