Component Testing
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Multifunction Intake Air Sensor
- Test the IAT Sensor 2 by varying the sensor temperature while monitoring the air temperature with a thermometer. Compare the readings with the scan tool IAT Sensor 2 parameter. The values should be within 5%.
- If not within 5%
Replace the B75C Multifunction Intake Air sensor.
- If within 5%
- If not within 5%
- All OK.