Conditions for Running the DTC

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0010, P0013, P0016, P0017, P0335, P0340, P0341, P0365, or P0366 is not set.
The engine is running.
The ignition voltage is between 11-32 V.
The camshaft position actuator is enabled.
The rate of change in the camshaft position is less than 3° for 4 s.
DTCs P0011 and P0014 runs continuously once the above conditions are met for greater than 0.1 s.