LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Controls And Fuel - 1.4L (LUJ LUV) - DTC P0300 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P069E: Fuel Pump Control Module Requested MIL Illumination (LUJ) >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pump control module constantly monitors the fuel pump control system for any condition which may adversely affect vehicle emissions. If a condition is detected, the fuel pump control module sets a DTC and sends a serial data message to the engine control module (ECM). The ECM sets DTC P069E to inform the technician that the fuel pump control module has set the emission related DTC. The serial data message sent by the fuel pump control module also contains a request for the ECM to illuminate the malfunction indicator lamp (MIL).

The technician can observe the DTC that was set by the fuel pump control module by reviewing the ECM Freeze Frame records on the scan tool. The ECM Freeze Frame records also contain the engine operating conditions present when the fuel pump control module DTC set.