LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Controls And Fuel - 1.4L (LUJ LUV) - DTC P0300 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0628: Fuel Pump Enable Circuit (LUV) >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

The engine control module (ECM) provides ignition voltage to the chassis control module whenever the engine is cranking or running. The control module enables the chassis control module as long as the engine is cranking or running, and ignition system reference pulses are received. While this enable voltage is being received, the chassis control module supplies a varying voltage to the in-tank fuel pump module in order to maintain the desired fuel line pressure.