LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Liftgate Release Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Trunk Lid/Liftgate Window Exterior Unlatch Switch parameter changes between Inactive and Active when pressing the S46B Liftgate Unlatch Switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing - Liftgate Release Switch Inoperative.

    • If the parameter changes 
  3. NOTE:

    Verify all doors have been commanded UNLOCK with a scan tool prior to commanding the liftgate to unlatch

  4. Verify the M30 Liftgate Latch functions when commanding the Liftgate Unlatch with a scan tool.
    • If the M30 Liftgate Latch does not UNLATCH 

      Refer to Circuit/System Testing - Liftgate Latch Inoperative

    • If the M30 Liftgate Latch does UNLATCH 
  5. All OK.