Arming the Content Theft Deterrent System
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Use the following procedure in order to arm the system:
- Place the shift lever in P (park).
- Turn OFF the ignition.
- Open any door.
- Lock the doors by pressing the LOCK button on the transmitter. The system is in standby mode and will not start the arming timer until all doors are closed.
- The system will begin the arm sequence immediately after the last door is closed. If the keyless entry transmitter is used to arm the system after the vehicle doors are closed, the arm sequence will begin as soon as the LOCK command is received from the transmitter.
- Pressing the LOCK button on the keyless entry transmitter a second time will bypass the delayed arming function and force the system to arm.
NOTE:
The system is not armed if the doors are locked manually; the remote keyless entry transmitter must be used to arm the content theft deterrent system.