LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Cellular System, Entertainment System, And Navigation System) >> Special Tools and Equipment >> Special Tools (MIT tool instructions) >> Holden Radio Bluetooth Pairing Instructions

Holden Radio Bluetooth Pairing Instructions

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the radio controls, place the radio into "Discoverable Mode".
  2. Place the MIT into Bluetooth mode by pressing TEST SELECTOR until the Bluetooth LED is illuminated.
  3. With the MIT in Bluetooth mode Press and Release the #1 button (the Bluetooth LED will begin to slowly blink).
  4. Now Press and release the PAIR/CALL button on the MIT (the Bluetooth LED will begin to blink a little faster).
  5. On the radio Enter the PASSKEY when prompted: (press "0000" then Press "OK").
  6. The MIT and radio will PAIR and CONNECT (the Bluetooth LED will be Fast Flashing).
  7. Use as regular MIT at this point.
scientia non olet · About LEMON Manuals