Rear Wheel Bearing and Hub Replacement (With Drum Brakes)

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Wheel Bearing And Hub (With Drum Brakes)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle Remove the tire and wheel. Tire and Wheel Removal and Installation Remove the rear brake drum. Brake Drum Replacement Remove the rear wheel speed sensor. Rear Wheel Speed Sensor Replacement
1	Rear Wheel Bearing Hub Bolts (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 58 N.m (43 lb ft)
2	Rear Wheel Bearing and Hub Assembly

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the tire and wheel. Tire and Wheel Removal and Installation
Remove the rear brake drum. Brake Drum Replacement
Remove the rear wheel speed sensor. Rear Wheel Speed Sensor Replacement

Rear Wheel Bearing Hub Bolts (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
58 N.m (43 lb ft)

Rear Wheel Bearing and Hub Assembly