Rear Bumper Fascia Access Hole Cover Replacement
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Rear Bumper Fascia Access Hole Cover Push-In Retainer (Qty: 2)
CAUTION:
Refer to Fastener Caution . |
| 2 | Rear Bumper Fascia Access Hole Cover Procedure Carefully push a small nylon wedge between the rear fascia and the fascia access hole cover. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia access hole cover from the rear fascia. |