Front Bumper Upper Impact Bar Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Bumper Upper Impact Bar

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia energy upper absorber. Refer to Front Bumper Fascia Energy Upper Absorber Replacement . Remove the 3 radiator air baffle push-in retainers.
1	Front Bumper Upper Impact Bar Bolt (Qty: 8) CAUTION: Refer to Fastener Caution . Tighten 32 N.m (24 lb ft)
2	Front Bumper Upper Impact Bar

Callout

Component Name

Preliminary Procedures

Remove the front bumper fascia energy upper absorber. Refer to Front Bumper Fascia Energy Upper Absorber Replacement .
Remove the 3 radiator air baffle push-in retainers.

Front Bumper Upper Impact Bar Bolt (Qty: 8)

CAUTION:

Refer to Fastener Caution .

Tighten
32 N.m (24 lb ft)

Front Bumper Upper Impact Bar