Front Bumper Fascia Skid Plate Replacement (Encore)
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Front Bumper Fascia Skid Plate Procedure Carefully push a small nylon wedge between the front fascia and the fascia skid plate. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia skid plate from the front fascia. |