Installation Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new drain plug.
- Tighten the drain plug to 40 N.m (30 lb ft).
- Fill the transfer case to the bottom of the fill plug hole. Refer to Adhesives, Fluids, Lubricants, and Sealers
- Install a NEW fill plug and tighten to 40 N.m (30 lb ft).
- Lower the vehicle.