LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Transfer Case - AAM) >> Repair Instructions - On Vehicle >> Rear Output Shaft Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transfer case rear output shaft seal. Refer to Transfer Case Rear Output Shaft Installation in Transfer Case Assemble .
  2. Install the transfer case propeller shaft flange. Refer to Transfer Case Propeller Shaft Flange in Transfer Case Assemble .
  3. Install the rear output shaft housing. Refer to Transfer Case Rear Output Shaft Housing Installation in Transfer Case Assemble .
  4. Install the rear propeller shaft. Refer to Two-Piece Propeller Shaft Replacement .
  5. Fill the transfer case with fluid. Refer to Transfer Case Fluid Replacement .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals