Removal Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Loosen the exhaust clamp fastener (4) and remove the exhaust muffler (2), from the warm up 3 way catalytic converter (1), and the exhaust isolator (3).
- Support the exhaust muffler (2) with mechanics wire.
- Remove the 2 fasteners (4) securing the warm up 3 way catalytic converter (3) to the exhaust front pipe (5).
- Remove the warm up 3 way catalytic converter (3) from the exhaust isolators (1) and remove the warm up 3 way catalytic converter from the vehicle.
- Discard the exhaust front pipe gasket (2).
WARNING:
Refer to Exhaust Service Warning .
WARNING:
Refer to Protective Goggles and Glove Warning .