Component Testing

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Ignition OFF.
Disconnect a cooling fan relay.
Test for 70-110 Ω between terminals 85/2 and 86/1.
- If less than 70 Ω or greater than 110 Ω
  Replace the cooling fan relay.
- If between 70-110 Ω
Test for infinite resistance between following terminals:
- 30/3 and 86/1
- 30/3 and 87/5
- 30/3 and 85/2
- 85/2 and 87/5
  - If less than infinite resistance
    Replace the cooling fan relay.
  - If infinite resistance
Install a 20 A fused jumper wire between relay terminal 85/2 and 12 V.
Install a jumper wire between relay terminal 86/1 and ground.
Test for less than 2 Ω between terminals 30/3 and 87/5.
- If 2 Ω or greater
  Replace the cooling fan relay.
- If less than 2 Ω
All OK.