Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify an audible click is heard or felt from each cooling fan relay when commanding the cooling fan ON and OFF with a scan tool.
- If a click is not heard or felt at each of the relays
Refer to Circuit/System Testing.
- If a click is heard or felt at each of the relays
- If a click is not heard or felt at each of the relays
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.