Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify that there are no cooling system DTCs set.
- If any DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no DTCs are set
- If any DTCs are set
- Verify the scan tool parameters listed below display OFF.
- Cooling Fan Relay 1 Command
- Cooling Fan Relays 2 and 3 Command
- If a scan tool parameter displays ON
Refer to Diagnostic Aids and Symptoms - Engine Cooling for further diagnosis.
- If both scan tool parameters display OFF
- Verify that the fan is not activated.
- If the fan is operating
Refer to Circuit/System Testing.
- If the fan is OFF
- If the fan is operating
- All OK.