LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - On Vehicle >> Valve Stem Oil Seal and Valve Spring Replacement >> Intake Valve Stem Oil Seal Installation Cylinder 2

Intake Valve Stem Oil Seal Installation Cylinder 2

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Transfer the EN-6086-7  lever to the exhaust side of cylinder 2.
  2. Replace the EN-6086-11  demounting piece with the assembled EN-6086-200-1  mounting piece (1).
  3. Install the intake valve keys, intake valve spring retainers, intake valve springs and the intake valve stem oil seals of cylinder 2 as described above.
scientia non olet · About LEMON Manuals