Exhaust Valve Stem Oil Seal Removal Cylinder 1
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Remove the exhaust valve stem oil seals of cylinder 1:
- Transfer the EN-6086-7 lever to the exhaust side of cylinder 1.
- Replace the EN-6086-200-1 mounting piece with the EN-6086-11 demounting piece.
- Remove the exhaust valve keys, exhaust valve spring retainers, exhaust valve springs and the exhaust valve stem oil seals as described above.