Removal Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LUV) .
- Remove the turbocharger oil feed pipe bolt (5).
- Remove the turbocharger oil feed pipe hollow screw (4) and the 2 seal rings (1) and (3).
- Remove the turbocharger oil feed pipe (2) and the rubber seal ring.