Removal Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine front cover. Refer to Engine Front Cover with Oil Pump Replacement .
- Push the timing chain (2) in direction to the timing chain tensioner (1) and install the EN-955 pin (3).
- Remove the two upper timing chain guide bolts (1).
- Remove the upper timing chain guide (2).
- Remove the two timing chain guide right side bolts (2).
- Remove the timing chain guide right side (1).
- Remove the timing chain tensioner shoe bolt (2).
- Remove the timing chain tensioner shoe (1).
- Remove the timing chain (1) and crankshaft sprocket (2) together as a unit.
- Remove the engine front cover gasket (1).
NOTE:
If EN-955 fixing pin can not be inserted, compress the timing chain tensioner further with the aid of a flat bladed tool to allow complete insertion of the pin.