Warm Up Three-Way Catalytic Converter Removal
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the heated oxygen sensor wiring harness (3) from retainer clip.
- Remove the 2 catalytic converter to catalytic converter bracket nuts (4) and (6).
- Loosen the three way warm up catalytic converter V-clamp (1).
- Remove the three way warm up catalytic converter (5) and the catalytic converter seal (2).