LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - Off Vehicle >> Intake Manifold Assemble

Intake Manifold Assemble

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Evaporative Emission Canister Purge Solenoid Valve And Manifold Absolute Pressure Sensors
    GM2191857Courtesy of GENERAL MOTORS COMPANY
  1. Install the evaporative emission canister purge solenoid valve (3).
  2. Install the 2 manifold absolute pressure sensors (2).
  3. Install the 2 manifold absolute pressure sensor bolts (1) and tighten.
    4. Fig 2: Fuel Injection Fuel Rail Assembly And Intake Manifold Gasket
    GM2191856Courtesy of GENERAL MOTORS COMPANY
  4. Install the fuel injection fuel rail assembly (3).
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the 2 fuel injection rail bolts (2) and tighten to 8 N.m (71 lb in).
  6. Install the fuel injection rail ground cable nut (1) and tighten.
  7. Install a NEW intake manifold gasket (4).
scientia non olet · About LEMON Manuals