LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - Off Vehicle >> Intake Camshaft Removal

Intake Camshaft Removal

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Camshaft Bearing Cap Bolts Removal Sequence
    GM2190728Courtesy of GENERAL MOTORS COMPANY
  1. Remove the camshaft bearing cap bolts in a spiral sequence as shown one turn at a time until there is no spring tension pushing on the camshaft.
    2. Fig 2: Intake Camshaft, Camshaft Bearing Caps And Bolts
    GM2190730Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Mind the markings on the camshaft bearing caps to ensure they will be installed in the same position.

  2. Remove the 10 camshaft bearing cap bolts (1).
  3. Remove the 5 camshaft bearing caps (2).
  4. Remove the intake camshaft (3).
scientia non olet · About LEMON Manuals