Engine Oil Cooler Removal
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil cooler coolant outlet hose clamp (1).
- Remove the oil cooler coolant outlet hose (2) from engine coolant thermostat housing.
- Remove the oil cooler coolant inlet hose clamp (3).
- Remove the oil cooler coolant inlet hose (4) from water outlet.
- Remove the oil cooler coolant outlet pipe bolt (7).
- Remove the 3 oil cooler bolts (5).
- Remove the engine oil cooler assembly (6) and the 2 oil cooler sealings (8) and (9).