LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - Off Vehicle >> Engine Front Cover and Oil Pump Assemble >> Engine Front Cover Assemble

Engine Front Cover Assemble

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Engine Front Cover Components
    GM2191036Courtesy of GENERAL MOTORS COMPANY
  1. Install the crankshaft front oil seal (10).
  2. Install the oil pressure relief valve (7), (8) and (9) and tighten to 50 N.m (37 lb ft).
  3. Install the exhaust camshaft position sensor (5) and the seal ring (4).
  4. Install the exhaust camshaft sensor bolt (6) and tighten to 6 N.m (53 lb in).
  5. Install the intake camshaft position sensor (2) and the seal ring (3).
  6. Install the intake camshaft sensor bolt (1) and tighten to 6 N.m (53 lb in).