LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - Off Vehicle >> Engine Front Cover Gasket Installation

Engine Front Cover Gasket Installation

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the sealing surfaces and remove all remains of old sealing compound material.
  2. Fig 1: Sealing Compound Application Areas
    GM2190694Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The thickness of the sealing bead should be 2 mm (0.0787 in).

  3. Apply sealing compound to the shown areas (1) and (2). Refer to Adhesives, Fluids, Lubricants, and Sealers .
  4. Fig 2: Engine Front Cover Gasket
    GM2190693Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Mind the guide sleeves.

  5. Install the NEW engine front cover gasket (1).
  6. Install the timing chain. Refer to Camshaft Timing Chain Installation .
  7. NOTE:

    The complete installation procedure should not take longer than 10 minutes.

  8. Install the engine front cover. Refer to Engine Front Cover and Oil Pump Installation .