Engine Coolant Thermostat Housing Installation
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the sealing surfaces.
- Install the engine coolant thermostat housing (2) and a NEW engine coolant thermostat housing seal ring (3).
- Install the 3 engine coolant thermostat housing bolts (1) and tighten to 8 N.m (71 lb in).
CAUTION:
Refer to Fastener Caution .