Engine Block Assemble
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the 4 piston oil nozzles (1).
- Install the 4 piston oil nozzle bolts (2) and tighten to 25 N.m (18 lb ft).
- Install the knock sensor (2).
- Install the knock sensor bolt (3) and tighten to 20 N.m (15 lb ft).
- Install the 2 cylinder head guide sleeves (1). Use a rubber mallet.
- Install the 2 transmission guide sleeves (4) and (5). Use a rubber mallet.
CAUTION:
Refer to Fastener Caution .