Drive Belt Tensioner Installation
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the drive belt tensioner (1).
- Install the upper drive belt tensioner bolt (2).
- Install the lower drive belt tensioner bolt (3).
- Tighten the lower drive belt tensioner bolt (M8) to 22 N.m (16 lb ft).
- Tighten the upper drive belt tensioner bolt to 55 N.m (41 lb ft).
CAUTION:
Refer to Fastener Caution .