LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Cleaning and Inspection >> Crankshaft Out-of-Round, Check

Crankshaft Out-of-Round, Check

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Dial Gauge Tool
    GM2190919Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Crankshaft removed.

  1. Insert the crankshaft in the engine block.
  2. Install the GE-571-B  gauge (1).
    • Attach holder to the engine block.
    • Place the dial gauge plunger against the crankshaft bearing journal and adjust.
  3. Check the rotational play of the crankshaft.
    • Turn the crankshaft evenly.
    • Maximum permissible rotational play 0.03 mm (0.001 in).
  4. Remove the GE-571-B  gauge.
scientia non olet · About LEMON Manuals