LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 1.4L (LUV)) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Cleaning and Inspection >> Crankshaft End Play, Check

Crankshaft End Play, Check

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Dial Gauge Tool
    GM2190913Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Crankshaft attached with crankshaft bearing caps.

  1. Install the GE-571-B  gauge (1).
    • Install the holder on the front of the engine block.
    • Place the dial gauge plunger against the crankshaft and adjust.
  2. Measure the longitudinal play of the crankshaft.
    • Move the crankshaft in the longitudinal direction.
    • Permissible crankshaft end play 0.100-0.202 mm (0.0039-0.0080 in).
  3. Remove the GE-571-B  gauge.
scientia non olet · About LEMON Manuals