Camshaft Sprocket Installation
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the intake camshaft sprocket (3).
- Install the intake camshaft position sensor exciter wheel (2) and the intake camshaft sprocket bolt (1), but do not tighten yet.
- Install the exhaust camshaft sprocket.
- Install the exhaust camshaft position sensor exciter wheel and the exhaust camshaft sprocket bolt, but do not tighten yet.
NOTE:
Tightening of camshaft sprocket bolts will be done after the engine front cover installation.