Instrument Panel Knee Bolster Replacement (Encore)

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Knee Bolster (Encore)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Instrument Panel Knee Bolster Fastener (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Knee Bolster Procedure Use a flat bladed plastic trim tool in order to release the retainers securing the knee bolster to the instrument panel assembly. Disconnect the data link connector.

Callout

Component Name

Instrument Panel Knee Bolster Fastener (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Instrument Panel Knee Bolster

Procedure

Use a flat bladed plastic trim tool in order to release the retainers securing the knee bolster to the instrument panel assembly.
Disconnect the data link connector.