LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Lighting System) >> Diagnostic Information and Procedures >> Park, License, and/or Tail Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Park Lamp Switch parameter changes between Active and Inactive while commanding the park lamps ON and OFF with the headlamp switch.
    • If the parameter does not change 

      Refer to Park Lamp Switch Malfunction.

    • If the parameter changes 
  3. Verify the left park lamps turn ON and OFF when commanding the Left Park Lamps ON and OFF with a scan tool.
    • If the left park lamps do not turn ON and OFF 

      Refer to Park Lamps Malfunction.

    • If the left park lamps turn ON and OFF 
  4. Verify the right park lamps turn ON and OFF when commanding the Right Park Lamps ON and OFF with a scan tool.
    • If the right park lamps do not turn ON and OFF 

      Refer to Park Lamps Malfunction.

    • If the right park lamps turn ON and OFF 
  5. Verify the license plate lamps turn ON and OFF when commanding the License Plate Lamps ON and OFF with a scan tool.
    • If the license plate lamps do not turn ON and OFF 

      Refer to License Plate Lamps Malfunction.

    • If the license plate lamps turn ON and OFF 
  6. All OK.