Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Door Ajar Sw. parameter changes between Active and Inactive while opening and closing each vehicle door.
- If the parameter does not change
Refer to Door Ajar Indicator Malfunction .
- If the parameter changes
- If the parameter does not change
- Verify the dome lamps turn ON and OFF while commanding the Courtesy Lamps ON and OFF with a scan tool.
- If the dome lamps do not turn ON and OFF
Refer to Circuit/System Testing.
- If the dome lamps turn ON and OFF
- If the dome lamps do not turn ON and OFF
- All OK.