Conditions for Setting the DTC
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
DTC C0277 06
- The BCM detects a short to ground or an open/high resistance in the BPP sensor 5 V reference circuit.
- The BCM detects a short to ground or an open/high resistance in the BPP sensor signal circuit.
DTC C0277 07
- The BCM detects a short to voltage in the BPP sensor 5 V reference circuit.
- The BCM detects a short to voltage in the BPP sensor signal circuit.
- The BCM detects an open/high resistance in the BPP sensor low reference circuit.
DTC C0277 09
The BCM detects the BPP sensor signal is changing faster than possible under normal operating conditions.
DTC C0277 4B
The DTC will set when the BPP sensor home position is not learned.
DTC C0890 03
The BCM detects a short to ground in the BPP sensor 5 V reference circuit.
DTC C0890 07
- The BCM detects a short to voltage in the BPP sensor 5 V reference circuit.
- The BCM detects a short to voltage in the BPP sensor low reference circuit.